Magnetic pyrolysis furnace and magnetic pyrolysis apparatus
Which is the expression magnetically decomposed furnace and magnetic pyrolysis apparatus correctly?
I may be asked. Speaking in a broad range, I think that it is a word pointing to the same thing, but strictly speaking it is a little different.
Magnetic pyrolysis furnace
Magnetic pyrolysis furnace is “kiln” (bite) which performs thermal decomposition. Pyrolysis of organic matter is not a simple phenomenon, multiple conditions such as calculated core heat source location, internal kiln structure, gas convection within the kiln can be realized by combination.
We offer two sizes, 2 m3 and 5 m3, but this size also has a big reason. Inquiries from overseas may require a large kiln such as 10 cubic meters or 50 cubic meters, but there is no big merit in getting large.
When it comes to a kiln exceeding the size of 5 cubic meters, it is the same as building a house at the site and there must be a combination by welding the material (steel plate etc.) at the site. If it is 2 m3 in size, it can be transported with one 20-foot container including exhaust gas treatment equipment, even if it is 5 m3 type, it can be transported with 40 ft container.
If it is assumed that the throughput (amount of dust) per day is about 10 tons, we propose to introduce 2 5 m type. Even when stopping and maintaining the kiln, there is no need to stop the kiln on one side, and in most cases, even if you desire to process 10 tons a day, even when there are few garbage or days when no garbage occurs at all There are also.
Magnetic pyrolysis apparatus
What is a magnetic pyrolysis apparatus?
If it is said, it is described as “organic matter decomposing equipment” in general, including pyrolysis furnace, including control of ionized air inhalation and treatment of exhaust gas generated from the kiln.
Magnetic pyrolysis generates heat, but it does not burn in the kiln, but heat is generated by the reaction with the carbon molecule that occurs when the ionized air enters the kiln. The heat generated is used to dry organic matter, but the organic matter itself collapses by oxidation treatment. The control unit performs control of the temperature inside the kiln, inspiration of the plasmatized air, etc. so that magnetic pyrolysis continues. If there is an abnormal temperature rise of the kiln, it is also the role of the controller to stop suction immediately and stop the thermal decomposition process.
Gas is generated when organic matter collapses, but it is expressed as “magnetic pyrolysis apparatus” including processing this gas.
At present, there are two types of exhaust gas treatment.
1. Scrubber exhaust gas treatment equipment (gas treatment with water filter)
2. Reactor exhaust gas treatment equipment (treatment by spontaneous combustion of gas)
In the reactor system, burn off “exhaust gas” discharged from the kiln at a temperature close to 1000 ° C, completely burn out hazardous substances, and then discharge it as 100 ° C or less of exhaust gas. It is an ultra-miniaturized device for treating waste gases realized in incinerators of billions of yen.
Summary
“Magnetic pyrolysis furnace” and “Magnetic pyrolysis equipment” are the same thing, but the difference in expression between the kiln and the whole equipment.
1. Control of pyrolysis treatment
2. Unit for monitoring safety
3. Safely exhausting exhaust gas treatment
4. Design kiln where magnetic pyrolysis occurs
Products that have earned high acclaim from years of research and introduction results are the MG 22 series.
ASMETELL JAPAN .INC
We are doing questions, consultation and consulting about introduction.
