Regarding the operation of the magnetic pyrolysis apparatus MG 22
Once MG 22 starts operation, it continues to drive with no fuel by continuing to throw organic matter.
We will briefly explain notes on operation, operation method, operation method and so on.
Operation of MG 22
We operate the equipment with charcoal.
Add the residue (inorganic ceramic powder) after treatment with MG22 which is the heat source, and put in the general charcoal ignited on it. Then, put the organic matter to be disassembled.
* “General charcoal”: Commercially available charcoal used for barbecue and others
If you have a power generator or steam generator, be sure to check water flow rate and water temperature first.
In addition, since it warms by circulating water, please be sure to check the circulation of water, please do not be empty.
Control of MG 22
After checking the circulation of water, check the temperature of the control unit.
The basic set temperature will be set when the main unit is installed. The input amount of organic matter is the maximum amount from 70% to 80% of the main body size.
| Type | Estimated amount of input at one time |
| MG22Eｈ-5M（5㎡） | 4.0m³ |
| MG22Eｈ-5M（2㎡） | 1.6m³ |
It is the most efficient cycle to put organic matter every two to three times a day, every 8 to 12 hours.
Daily maintenance of MG 22
1. Removal of residue (inorganic ceramic powder) remaining after organic decomposition (once every 2 to 3 days)
* If you have made full operation in the above cycle
It also relates to the type of organic matter to be introduced, but it will be reduced to 1/200 – 1/400 of the input amount, so decide the cycle of taking out residue according to the amount to be charged daily.
2. About once every two weeks, cleaning of the flue between the main body and “exhaust gas purification device” is necessary
ASMETELL JAPAN .INC
We are doing questions, consultation and consulting about introduction.
