MG22 has been introduced to various places.Check out some of the case studies, herewith.
1.Hospital
Medical waste to be discharged at the hospital will take disposal and transport costs as compared with the general waste.
The cost of disposal & transportation for medical waste discharged at hospital is normally been higher than general waste at other places.
In addition, paper diapers, discarded in hospitals and medical facilities are included high molecular polymer very much, and also, it will remain in a large amount as a residue in case of incineration.
Illegal dumping, and problem of environmental pollution, and, and health damage caused by illegal re-use of medical waste are also has been occurred.
Example of installation
Thus, by installing MG22 the hospital you are possible to solve these the above problems.
By detoxifying, minimizing the medical waste in hospitals, you are able to reduce the disposal cost, and, to prevent the unauthorized re-use.
If you use our MG22,waste are exposure long time to the heat source at inside of MG22, you can kill bacteria and treat waste sagely and harmlessly.
In addition to above, high molecular polymer in paper diapers is almost diapered, and, finally it is possible to minimize the volume of waste.
Since the amount of waste is very low, it makes the disposal cost reduce drastically.
And, because of treatment medical waste without dropping to the outside, it will lead to the effect of preventing such unauthorized use.
In addition, such as use of the generated electric power to the emergency power generation, re-use of energy is also possible.
2.Industrial waste treatment company
Petroleum-based waste, such as plastic and rubber are that is included in the industrial waste, when these waste are burned in incinerators, harmful substances such as dioxin will be occurred occur.
To remove harmful substances is required high temperature for operating incineration facility means, take much cost for fuel.
In addition, from the lack of final disposal sites, environmental destruction and increase of disposal cost are not unavoidable.
Example of installation
By introducing MG22 in industrial waste disposal, realized to minimize the petroleum waste without fuel, and, to achieve reduction of running cost.
It is also possible to reuse the energy obtained when to decompose the waste as hot water or electricity on process of treatment.
In addition, after the waste was decomposed, leaving only inorganic materials such as metals, and, remained metals have also been used, such as in the metal recovery plant.
3.A food processor
Example of installation
A large amount of plant / vegetable, animal waste in the food processing industry is has occurred.
The recycling technology of food waste, and composting, animal feed, but it is currently difficult to recycle all the waste due to from the relationship of quality and demand.
It also causes problems such as re-use of food waste by waste disposal contractors.
By introducing MG22
n the food processing industry, it has achieved to reduce a reduction in disposal costs.
You can also reuse the energy obtained on operation such
s hot water or electricity.
Then, under operation process the waste at own plant, possible we have to prevent unauthorized reuse of food waste.
4.Remote island
Waste disposal problem in the island is to spend large expenses cost.
To install the general waste incineration facilities, it takes a high cost, such as installation costs, operating costs and maintenance costs.
In addition, due to the lack of final disposal sites, it is required to consider the cost of transporting the waste to the island outside of island.
Example of installation
After launching our MG22, they achieved to resolve their own Resolved has a waste disposal problem of the island.
Since the unnecessary final waste fuel is minimized without fuel, they achieved to reduce the total cost for their waste disposal.
In addition, the re-use of energy gained from operation of MG22, they also realized reduction of other cost.
For this reason, such as municipalities and waste disposal contractors of the island, they are going to to launch our MG22.
5.Hot spring facilities
In the hot spring facilities, it is required to worm more hot water by boiler, and, fuel costs, such as fuel oil and kerosene has become an issue.
磁気熱分解装置の温泉施設設置例
Thus, after launching our MG22 o the hot spring facility, they achieved to reduce fuel cost.
In order to stably produce hot water, it is required to have boiler with high capacity, or, add another facility. When MG22 is launched, not only for waste, but also generating heat for making hot water, it is able to reduce fuel cost drastically on using waste generated from own facility and nearby area (forestry, agriculture, etc.)
Also, on using MG22, the heat source can be secured over a long period of time, possible to produce hot water stably with less cost than incinerating facility.
Since our MG22 is suitable for hot spring facility, too, and,it has been introduced to a variety of spa facilities.
ASMETELL JAPAN .INC
We are doing questions, consultation and consulting about introduction.